PDA

View Full Version : Wheely King Bodies

Adamsvilleusa
July 19th, 2008, 10:48 PM
Any good 1/12th scale monster truck bodies out there? I would like one for a wheely king. Any ideas are appreciated.

Thanks,

Joe
AvengerFan86
July 19th, 2008, 10:56 PM
Most on ebay will fit with lil mods to the pin hole area hope that helps.
gmtgmt
July 20th, 2008, 12:50 AM
yeah
Dodge Tradesman van
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNAV1&P=0
Ford F100 60s
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNAV3&P=0
a few made for wheely king
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXUHV9&P=SM
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXUHV8&P=SM
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTYL2&P=SM
JRB4337
July 21st, 2008, 09:20 AM
Hey ya'll know there is all the 2Xtreme Racing Team trucks for the wheely king in the 08 yearbook.
Adamsvilleusa
July 21st, 2008, 12:59 PM
Thanks for the info. I checked them out online and only found the bodies for the E-Savage (Bounty Hunter). Hopefully they will be available for the Wheely King shortly for purchase.


Anyone have a picture of one from the yearbook or anywhere else?



Hey ya'll know there is all the 2Xtreme Racing Team trucks for the wheely king in the 08 yearbook.
Oldskool
July 21st, 2008, 01:32 PM
The proline bodies for the traxxas stampede will also fit the wheely king. You may have to drill holes for the body post in a different place.
Adamsvilleusa
July 22nd, 2008, 12:33 AM
Has anyone added rear steer to their wheely king yet?
fourxforceuk
July 22nd, 2008, 05:10 AM
I was thinking that.

When I get my Wheely King, I'm gonna mod it up a little (like Dallas Rogers' in the RC Trucks thread) and I plan to add 4WS. I don't know much about making it independent (I hope I can) but adding 4WS should be easy, seeing as the front and rear axles are identical.
Dallas Rogers
July 22nd, 2008, 09:15 AM
how are you going to mod it?

like the old version or the tube frame?

a tube frame would cost about $250

if you need help with how did you do this, how did you do that i could tell you

the tires are the hardest part probibly
fourxforceuk
July 22nd, 2008, 12:25 PM
The Racer King, the first one. It was seriously sweet. Mine's gonna have everything you did there, although the chassis plates will be black. Looking forward to it... just need to save to get a WK :p

If I were to build a tube chassis, that would be Clod sized. I'm thinking of doing it actually, and adding parts to it gradually... I can't afford over $1,000 at once :p
Dallas Rogers
July 27th, 2008, 01:52 AM
i eventualy painted the chassis plates black but it still looked too stock for me lol